Elements and technical features » History » Version 10
Version 9 (HAENNIG, Gerald, 12/15/2015 07:04 AM) → Version 10/35 (HAENNIG, Gerald, 12/15/2015 07:21 AM)
h1. 2.1 Elements
On optical link consists of :
* an optical transmitter ; it modulates input RF signal onto the optical wavelength intensity. Optical intensity is varied either directly by varying Laser Diode current or indirectly through a Mach-Zehnder Modulator modulating a constant laser source.
* fiber optic : in general, monomode fiber optic is used to avoid dispersion especially for long link. Morever, wavelengths around 1300 nm are used as dispersion is minimum in this region.
* an optical receiver : it is based on a photodectector. It detects RF modulation on the optical wavelength and outputs the RF signal.
The main parameters for an optical link are gain, bandwidth, Noise Figure (NF) and Spurious Free Dynamic Range (SFDR).
MITEQ, gain
Fiber optic products products, MITEQ : https://www.miteq.com/docs/MITEQ_FiberOptic_c40.pdf
Earth stations are based on an indoor/outdoor unit architecture. In our system we will count on:
* Outdoor: L-band reception antenna, the coaxial cable relying the antenna and the modulator transmitter (allows to convert from L-band to optic frequencies) and the 30m of Monomode FO.
* Indoor: consists of the receiver L-band/optic demodulator and the coaxial cable to rely the demodulator with the TV.
!schema.jpg!
On optical link consists of :
* an optical transmitter ; it modulates input RF signal onto the optical wavelength intensity. Optical intensity is varied either directly by varying Laser Diode current or indirectly through a Mach-Zehnder Modulator modulating a constant laser source.
* fiber optic : in general, monomode fiber optic is used to avoid dispersion especially for long link. Morever, wavelengths around 1300 nm are used as dispersion is minimum in this region.
* an optical receiver : it is based on a photodectector. It detects RF modulation on the optical wavelength and outputs the RF signal.
The main parameters for an optical link are gain, bandwidth, Noise Figure (NF) and Spurious Free Dynamic Range (SFDR).
MITEQ, gain
Fiber optic products products, MITEQ : https://www.miteq.com/docs/MITEQ_FiberOptic_c40.pdf
Earth stations are based on an indoor/outdoor unit architecture. In our system we will count on:
* Outdoor: L-band reception antenna, the coaxial cable relying the antenna and the modulator transmitter (allows to convert from L-band to optic frequencies) and the 30m of Monomode FO.
* Indoor: consists of the receiver L-band/optic demodulator and the coaxial cable to rely the demodulator with the TV.
!schema.jpg!