SOURCEFORGE » RALF » 2015 Evaluation and test of an optical / L-band tranceiver

{{toc}}

h1. 2.3 Main Parameters

This part lists the main specifications and highlights the main parameters to compare an optical link with a coaxial cable

h2. 2.3.1 Optical link

The optical link consists of :
* Optical transmitter OTX1910 : it modulates the intensity of the optical 1320 nm wavelength with the RF input signal ;
* Monomode fiber 9/125 OS2 (to avoid dispersion effect) to optical signal on a distance up to 10 kilometers ;
* Optical Receiver ORX1900 : it detects optical wavelength intensity modulation and outputs the RF modulating signal.

*Optical transmitter OTX1910*

|_. Optical transmitter OTX1910 |_. min |_. typ |_. max |_. Unit |_. comments |
|Supply |=. 9 |=. 12 |=. 14 |=. V |=. |
|Current consumption |=. - |=. - |=. 450 |=. mA |=. |
|RF Input Connector |\3=. 75 Ohm F-type |=. |=. |
|RF Return Loss |=. 14 |=. - |=. - |=. dB |=. |
|RF Maximum Input Level |=. - |=. - |=. 15 |=. dBm |=. |
|RF Input Dynamic Range |=. -65 |=. - |=. -10 |=. dBm |=. |
|RF Input Frequency |=. 700 |=. - |=. 2300 |=. MHz |=. |
|Optical Connecctor |\3=. LC/PC single mode |=. |=. |
|Optical signal wavelength |=. - |=. 1310 |=. - |=. nm |=. |
|Optical power level |=. - |=. 1 |=. - |=. dBm |=. |

*Fiber Monomode 9/125 OS2 (G.652.D ITU-T compliant), low dispersion at 1320 nm*

|_. Fiber Optic |_. min |_. typ |_. max |_. Unit |_. comments |
| Optical Loss |=. - |=. 0.3 |=. - |=. dB/km |=. 1320 nm |

*Optical receiver ORX1900*

|_. Optical receiver ORX1900 |_. min |_. typ |_. max |_. Unit |_. comments |
|Supply |=. 9 |=. 12 |=. 14 |=. V |=. |
|Current consumption |=. - |=. 240 |=. - |=. mA |=. |
|Optical Input Connector |\3=. LC/PC single mode |=. |=. |

Optical input signal wavelength range 1270 1310 1610 nm
Optical input signal level range -6 - 4 dBm
RF Output Connector 75 Ohm F-type
RF Input Frequency 700 - 2300 MHz



h2. 2.3.2 Coaxial cable