SOURCEFORGE » RALF » 2015 Evaluation and test of an optical / L-band tranceiver

{{toc}}

h1. 2.3 Main Parameters



This part lists the main specifications and highlights the main parameters to compare an optical link with a coaxial cable

h2. 2.3.1 Optical link

The optical link consists of :
* Optical transmitter OTX1910 : it modulates the intensity of the optical 1320 nm wavelength with the RF input signal ;
* Monomode fiber 9/125 OS2 (to avoid dispersion effect) to optical signal on a distance up to 10 kilometers ;
* Optical Receiver ORX1900 : it detects optical wavelength intensity modulation and outputs the RF modulating signal.

|_. Parameter |_. Unit |\5=.*Measurements* |
|_. Frequency |_. MHz |=. 700 |=. 1000 |=. 1500 |=. 2000 |=. 2300 |
|_. Optical Link Noise Figure |_. dB |=. 30.9 |=. 30.1 |=. 31.3 |=. 32.6 |=. 33.4 |

|_. Optical |.Optical transmitter OTX1910 |_. min |_. typ |_. max |_. Unit |_. comments |
| Supply |=. 9 |=. 12 |=. 14 |=. V |=. |
Current consumption - - 450 mA
RF Input Connector 75 Ohm F-type
RF Return Loss 14 - - dB
RF Maximum Input Level - - 15 dBm
RF Input Dynamic Range -65 - -10 dBm
RF Input Frequency 700 - 2300 MHz
Optical Connecctor LC/PC single mode
Optical signal wavelength - 1310 - nm
Optical power level - 1 - dBm

h2. 2.3.2 Coaxial cable