Noise Figure » History » Version 8
HAENNIG, Gerald, 12/13/2015 03:53 PM
1 | 1 | GOMEZ, Ramon | h1. Noise Figure |
---|---|---|---|
2 | 2 | HAENNIG, Gerald | |
3 | 2 | HAENNIG, Gerald | The Noise Figure has been measured with the FSV spectrum Analyzer. |
4 | 2 | HAENNIG, Gerald | |
5 | 2 | HAENNIG, Gerald | The optical link output power is measured with an input termination (done with 50 Ohm termination instead of 75 Ohm as not available) at a temperature of 290 K. |
6 | 2 | HAENNIG, Gerald | |
7 | 2 | HAENNIG, Gerald | Noise Factor : |
8 | 2 | HAENNIG, Gerald | |
9 | 2 | HAENNIG, Gerald | F = No / kToBG (No : measured output power noise; k : Boltzman constant ; To : ambiant temperature close to 290 K ; B : measurement bandwidth ; G : RF Gain) |
10 | 2 | HAENNIG, Gerald | |
11 | 2 | HAENNIG, Gerald | Noise Figure : |
12 | 2 | HAENNIG, Gerald | |
13 | 2 | HAENNIG, Gerald | NF=10*log10(Ftot) |
14 | 2 | HAENNIG, Gerald | |
15 | 8 | HAENNIG, Gerald | |_. Frequency | _. Optical Link Noise Figure | |
16 | 6 | HAENNIG, Gerald | | 700 | 30.9 | |
17 | 6 | HAENNIG, Gerald | | 1000 | 30.1 | |
18 | 6 | HAENNIG, Gerald | | 1500 | 31.3 | |
19 | 6 | HAENNIG, Gerald | | 2000 | 32.6 | |
20 | 6 | HAENNIG, Gerald | | 2300 | 33.4 | |