PhaseNoise » History » Version 10
Version 9 (HAENNIG, Gerald, 12/15/2015 12:11 AM) → Version 10/11 (HAENNIG, Gerald, 12/15/2015 12:23 AM)
h1. Phase Noise
A RF carrier passing through the optical link meets the DVB-S2 requirements.
Please note that the measurements are limited by the actual phase noise of the generator used for the RF carrier : this means that optical link performances could be better than these values.
|/2=. Frequency |\3=. Single Side Band [dBc/Hz] @ |
|=. 1 kHz |=. 10 kHz |=. 100 kHz |
|=. 700 MHz |=. -70.0 |=. -80.0 |=. -95.0 |
|=. 1000 MHz |=. -72.7 |=. -80.6 -82.7 |=. -96.0 |
|=. 2000 MHz |=. -72.0 |=. -82.0 |=. -95.0 |
|=. DVB-S2 minimum requirement |=. -50.0 |=. -73.0 |=. -85.0 |
A RF carrier passing through the optical link meets the DVB-S2 requirements.
Please note that the measurements are limited by the actual phase noise of the generator used for the RF carrier : this means that optical link performances could be better than these values.
|/2=. Frequency |\3=. Single Side Band [dBc/Hz] @ |
|=. 1 kHz |=. 10 kHz |=. 100 kHz |
|=. 700 MHz |=. -70.0 |=. -80.0 |=. -95.0 |
|=. 1000 MHz |=. -72.7 |=. -80.6 -82.7 |=. -96.0 |
|=. 2000 MHz |=. -72.0 |=. -82.0 |=. -95.0 |
|=. DVB-S2 minimum requirement |=. -50.0 |=. -73.0 |=. -85.0 |