Wiki » History » Version 17
Version 16 (piat, charles ugo, 02/17/2015 04:06 PM) → Version 17/114 (piat, charles ugo, 03/08/2015 05:21 PM)
Problem positioning: voici mon premier wiki
Router Configuration:
0)Problems/Errors during configuration:
PROBLEM 1: Couldnt connect to Internet Through router.
Definition: The satcom lab of Télécom Bretagne will soon be equipped with ISAE lan has configured a TooWay/KA SAT facilities (bi-directional internet via satellite) that come in two flavours: a fixed antenna for access within proxy HTTP server.
Solution: In order to connect to the lab and a fly away antenna for on-the field access. On-the-field access Internet we have to set proxy.isae.fr:3128 as the proxy http server.
Notes: If we want to connect to the router we have to put its IP as an exception to the proxy since the proxy server is provided through a transportable terminal (see pictures below). The transportable terminal integrates a modem, networking facilities and end-devices (e.g., DECT/VOIP phones). after the microtik router.
The objective of this project is ERROR 2: TX error to design and integrate router:
Definition: Couldn't connect to Internet. Can ping other devices connected to router but can't connect to router.
Solution: Reset router config with the portable terminal taking into account all aspects: communication, networking and physical integration. default pin code 1234
Introduction PROBLEM 3: Proxy makes impossible communication wioth sip server
The transportable terminal provides services Description: the proxy isae is not configured in inhospitable and isolated locations. In particular, our aim consists the router neither in bringing internet access through wired and Wi-Fi IP network and the IP-DECT 400 so it can register the phones with the sip server
Solution
Problem 4: We are not able to provide internal and external VoIP calls. connect the microtik router to a WIFI
Definition: The terminal quick set is composed of two antennas (one fixe not working. It chrashes with almost all changes. So we need to update it.
Solution: there is weird work arround: 1) scan wifi interfaces 2) try to connect to any wlan 3)go to quick set and another one mobile) set disconnect 5) now quick set works and we can connect to a modem wireless network.
Even with this the router is not able to receive the signal from the Ka-Sat satellite and convert update so we will do it into digital signal. using FTP
1) Quick set:
CPE - Short for "Customer Premises Equipment", this term is used to mean a "wireless station". It connects to a (wireless) network, like your computer would, but doesn't create its own (like an access point).
Home AP - Simple access point. One router, SSID, no VLANs, etc.
PTP Bridge - Used for setting up a Dect "Point to Point" link. Tends to be used to extend a single network to another site that doesn't have a cable running to it.
WISP AP - "Professional" access point ("WISP" is "Wireless Internet Service Provider", I think). It can serve multiple SSIDs at once, has VLAN support (to have each SSID be its own, isolated network, maybe with firewalling and some IP phones constitute routing between them), and other advanced things.
2)Using the second part PoE port of the terminal router to share power the network between IP-DECT
port 1 may be used to PoE the internet access and IP-DECT 400.
As is the phone calls. In the first part of the project, default port to gateway, we have identified to set the gateway in other port, or find if we can use cases and other ports to PoE.
NOTE: After some time we have found that the corresponding network architecture (address and routing plan). Then PoE output is PORT 10#, we proceed with can use port 1# as gateway. Now we will check if the integration voltage of this output is appropriate for the networking and communication components in a ruggedized flight case. Later we have connected the transportable terminal to the fixe antenna to realize some tests and demonstrations IP-DECT 400
NOTE2: The power of the overall system. The terminal router is transportable with its mobile antenna and could be used during important and catastrophic events by not enough to power up the red cross for instance server IP-DECT 400. We proceed to keep them in touch connect it with the head quarter. tenda PoE Adapter 1500S.
Content
I. Design of 3) Configuring the Ka-Sat Terminal ROUTER to bypass the proxy while we are connected to ISAE network.
a. Study of User Cases
b. Design of We will try to set proxy.isae.fr as the Network Architecture default web proxy. This way the router may be able to be updated.
c. Description of As this task will be too long, we decided to update the Components
II. Networking router manually or after the satellite connection.
4) Finding the IP-DECT 400 and Communication between components configuring it
a. Networking of components
b. Establishment of 4.1) Finding the VoIP link
c. Quality of Service IP addres and Fire-wall
III. Integration on connecting to the Ka-Sat Terminal webconfig portal:
a. Mounting of We used the components on IP scan to detect all the ruggedized flight case
b. Connection used IP connected to the antenna router and Test
List found the IP of figure
I. Design of the Ka-Sat Terminal server IP-DECT 400.
a. Study of User Cases
Use cases 1: Internet Access through wired We found that DHCP put the 192.168.88.251 this time. A priori, we will set all these IP network static after.
The use case 1 consists in providing internet We tried different pairs of defaults user/pass to access through wired network. The user must the web config page. Resulting that admin/admin was the correct one
4.2) finding the PIN code to connect its machine to the local area network via a wired cable. For instance voIP terminals
It's configurable in the user will connect its machine with an Ethernet cable page of the configuraiton web of IP-DECT 400
4.3) Connect to the router. The router will furnish a local IP address via DHCP. Finally server SIP
We can't see if the user IP-DECT 400 can act as server VoIP. We will have access try to internet and services as HTTP, SMTP, FTP, Streaming... Since connect to an exteranl SIP server
Problem encountered: PROBLEM 3
4.4) updating the networking is sharing amongst users, there will be some restrictions on the data rate.
Use cases 2: Internet Access through wireless IP network router by FTP
The use case 2 consists in providing internet access through wireless network. The user must connect its machine We reached to updated the local area network through Wi-Fi. The router will furnish a local IP address via DHCP to the user. Nevertheless, 6.26 version. We stil have the user must be authorized by the administrator to be connected to the network thanks to a logging same problems althougth.
4.5) Configuring Microtik
blablabla
4.6) DHCP static directions for IP-DECT 400 (192.168.88.251) and a password. In fact the Wi-Fi can be received by anyone around the terminal that miniPC freePBX server (192.168.88.253)
4.7) Stablishing internal connection:
Connexion interne:
Proxy: 127.0.0.1 (localhost)
KWS is the reason why we must restrict the connection by a password. Finally, after connection, dispositive with the user will have access to internet and services same function as HTTP, SMTP, FTP, Streaming... Since the networking is sharing amongst users, there will be some restrictions on IP-DECT 400 and it has a better documentation:
http://support.spectralink.com/sites/default/files/resource_files/KIRK_Wireless_Server_300_6000_Asterisk_Technical_Bulletin_0.pdf
5)Configuring the data rate.
Use case 3: Voice over IP
The use case 3 consists in providing a mini-PC
6) register phone call over Internet. The user will dial a number on hardphones available put proxi : 192.168.88.153 in the flight case. The call will be establish via voice over IP. There are two possibilities, whether it is an internal call, and so DECT : configuration => SIP => proxi1
go to the speaker we intend to reach is VOIP server add new extension.
VERY IMPORTANT on the same local network. In this case there should not have too much time delay and VOIP server, when adding new extension (new phone) we must cancel the phone call is totally free. Whether secret field (let it is an external phone call, and there will have at least 400 ms of time delay. It is corresponding to blank) in the part Device options.
(systematicaly each time we change the wave takes to travel from config of the two speakers via phone).
7) conference
download the satellite. In this case the phone call is not free, so some restrictions as international call must be establish.
module conference from : http://mirror.freepbx.org/modules/release/2.2/ (exemple : conferences-1.2.1.tgz ) and upload it in module admin.
[[page 2]]
Router Configuration:
0)Problems/Errors during configuration:
PROBLEM 1: Couldnt connect to Internet Through router.
Definition: The satcom lab of Télécom Bretagne will soon be equipped with ISAE lan has configured a TooWay/KA SAT facilities (bi-directional internet via satellite) that come in two flavours: a fixed antenna for access within proxy HTTP server.
Solution: In order to connect to the lab and a fly away antenna for on-the field access. On-the-field access Internet we have to set proxy.isae.fr:3128 as the proxy http server.
Notes: If we want to connect to the router we have to put its IP as an exception to the proxy since the proxy server is provided through a transportable terminal (see pictures below). The transportable terminal integrates a modem, networking facilities and end-devices (e.g., DECT/VOIP phones). after the microtik router.
The objective of this project is ERROR 2: TX error to design and integrate router:
Definition: Couldn't connect to Internet. Can ping other devices connected to router but can't connect to router.
Solution: Reset router config with the portable terminal taking into account all aspects: communication, networking and physical integration. default pin code 1234
Introduction PROBLEM 3: Proxy makes impossible communication wioth sip server
The transportable terminal provides services Description: the proxy isae is not configured in inhospitable and isolated locations. In particular, our aim consists the router neither in bringing internet access through wired and Wi-Fi IP network and the IP-DECT 400 so it can register the phones with the sip server
Solution
Problem 4: We are not able to provide internal and external VoIP calls. connect the microtik router to a WIFI
Definition: The terminal quick set is composed of two antennas (one fixe not working. It chrashes with almost all changes. So we need to update it.
Solution: there is weird work arround: 1) scan wifi interfaces 2) try to connect to any wlan 3)go to quick set and another one mobile) set disconnect 5) now quick set works and we can connect to a modem wireless network.
Even with this the router is not able to receive the signal from the Ka-Sat satellite and convert update so we will do it into digital signal. using FTP
1) Quick set:
CPE - Short for "Customer Premises Equipment", this term is used to mean a "wireless station". It connects to a (wireless) network, like your computer would, but doesn't create its own (like an access point).
Home AP - Simple access point. One router, SSID, no VLANs, etc.
PTP Bridge - Used for setting up a Dect "Point to Point" link. Tends to be used to extend a single network to another site that doesn't have a cable running to it.
WISP AP - "Professional" access point ("WISP" is "Wireless Internet Service Provider", I think). It can serve multiple SSIDs at once, has VLAN support (to have each SSID be its own, isolated network, maybe with firewalling and some IP phones constitute routing between them), and other advanced things.
2)Using the second part PoE port of the terminal router to share power the network between IP-DECT
port 1 may be used to PoE the internet access and IP-DECT 400.
As is the phone calls. In the first part of the project, default port to gateway, we have identified to set the gateway in other port, or find if we can use cases and other ports to PoE.
NOTE: After some time we have found that the corresponding network architecture (address and routing plan). Then PoE output is PORT 10#, we proceed with can use port 1# as gateway. Now we will check if the integration voltage of this output is appropriate for the networking and communication components in a ruggedized flight case. Later we have connected the transportable terminal to the fixe antenna to realize some tests and demonstrations IP-DECT 400
NOTE2: The power of the overall system. The terminal router is transportable with its mobile antenna and could be used during important and catastrophic events by not enough to power up the red cross for instance server IP-DECT 400. We proceed to keep them in touch connect it with the head quarter. tenda PoE Adapter 1500S.
Content
I. Design of 3) Configuring the Ka-Sat Terminal ROUTER to bypass the proxy while we are connected to ISAE network.
a. Study of User Cases
b. Design of We will try to set proxy.isae.fr as the Network Architecture default web proxy. This way the router may be able to be updated.
c. Description of As this task will be too long, we decided to update the Components
II. Networking router manually or after the satellite connection.
4) Finding the IP-DECT 400 and Communication between components configuring it
a. Networking of components
b. Establishment of 4.1) Finding the VoIP link
c. Quality of Service IP addres and Fire-wall
III. Integration on connecting to the Ka-Sat Terminal webconfig portal:
a. Mounting of We used the components on IP scan to detect all the ruggedized flight case
b. Connection used IP connected to the antenna router and Test
List found the IP of figure
I. Design of the Ka-Sat Terminal server IP-DECT 400.
a. Study of User Cases
Use cases 1: Internet Access through wired We found that DHCP put the 192.168.88.251 this time. A priori, we will set all these IP network static after.
The use case 1 consists in providing internet We tried different pairs of defaults user/pass to access through wired network. The user must the web config page. Resulting that admin/admin was the correct one
4.2) finding the PIN code to connect its machine to the local area network via a wired cable. For instance voIP terminals
It's configurable in the user will connect its machine with an Ethernet cable page of the configuraiton web of IP-DECT 400
4.3) Connect to the router. The router will furnish a local IP address via DHCP. Finally server SIP
We can't see if the user IP-DECT 400 can act as server VoIP. We will have access try to internet and services as HTTP, SMTP, FTP, Streaming... Since connect to an exteranl SIP server
Problem encountered: PROBLEM 3
4.4) updating the networking is sharing amongst users, there will be some restrictions on the data rate.
Use cases 2: Internet Access through wireless IP network router by FTP
The use case 2 consists in providing internet access through wireless network. The user must connect its machine We reached to updated the local area network through Wi-Fi. The router will furnish a local IP address via DHCP to the user. Nevertheless, 6.26 version. We stil have the user must be authorized by the administrator to be connected to the network thanks to a logging same problems althougth.
4.5) Configuring Microtik
blablabla
4.6) DHCP static directions for IP-DECT 400 (192.168.88.251) and a password. In fact the Wi-Fi can be received by anyone around the terminal that miniPC freePBX server (192.168.88.253)
4.7) Stablishing internal connection:
Connexion interne:
Proxy: 127.0.0.1 (localhost)
KWS is the reason why we must restrict the connection by a password. Finally, after connection, dispositive with the user will have access to internet and services same function as HTTP, SMTP, FTP, Streaming... Since the networking is sharing amongst users, there will be some restrictions on IP-DECT 400 and it has a better documentation:
http://support.spectralink.com/sites/default/files/resource_files/KIRK_Wireless_Server_300_6000_Asterisk_Technical_Bulletin_0.pdf
5)Configuring the data rate.
Use case 3: Voice over IP
The use case 3 consists in providing a mini-PC
6) register phone call over Internet. The user will dial a number on hardphones available put proxi : 192.168.88.153 in the flight case. The call will be establish via voice over IP. There are two possibilities, whether it is an internal call, and so DECT : configuration => SIP => proxi1
go to the speaker we intend to reach is VOIP server add new extension.
VERY IMPORTANT on the same local network. In this case there should not have too much time delay and VOIP server, when adding new extension (new phone) we must cancel the phone call is totally free. Whether secret field (let it is an external phone call, and there will have at least 400 ms of time delay. It is corresponding to blank) in the part Device options.
(systematicaly each time we change the wave takes to travel from config of the two speakers via phone).
7) conference
download the satellite. In this case the phone call is not free, so some restrictions as international call must be establish.
module conference from : http://mirror.freepbx.org/modules/release/2.2/ (exemple : conferences-1.2.1.tgz ) and upload it in module admin.
[[page 2]]