SOURCEFORGE » RALF » 2014 Design and integration of a TooWay-based multi-purpose terminal

voici mon premier wiki

Router Configuration:

0)Problems during configuration:

ERROR 0.1: TX error to router:

Definition: Couldn't connect to Internet. Can ping other devices connected to router but can't connect to router.

Solution: Reset router config with the default pin code 1234

1) Quick set: 

    CPE - Short for "Customer Premises Equipment", this term is used to mean a "wireless station". It connects to a (wireless) network, like your computer would, but doesn't create its own (like an access point).

    Home AP - Simple access point. One SSID, no VLANs, etc.

    PTP Bridge - Used for setting up a "Point to Point" link. Tends to be used to extend a single network to another site that doesn't have a cable running to it.

    WISP AP - "Professional" access point ("WISP" is "Wireless Internet Service Provider", I think). It can serve multiple SSIDs at once, has VLAN support (to have each SSID be its own, isolated network, maybe with firewalling and routing between them), and other advanced things.

2)Using the PoE port of the router to power the IP-DECT

port 1 may be used to PoE the IP-DECT 400.

As is the default port to gateway, we have to set the gateway in other port, or find if we can use other ports to PoE.

3)Changing the gateway of the microtik

[[page 2]]