Wiki » History » Version 6
Version 5 (VEILLARD GAROZ, Loïc, 02/08/2015 10:38 AM) → Version 6/114 (VEILLARD GAROZ, Loïc, 02/08/2015 10:42 AM)
voici mon premier wiki
Router Configuration:
0)Problems/Errors 0)Problems during configuration:
PROBLEM 1: Couldnt connect to Internet Through router.
Definition: The ISAE lan has configured a proxy HTTP server.
Solution: In order to connect to the Internet we have to set proxy.isae.fr:3128 as the proxy http server.
Notes: If we want to connect to the router we have to put its IP as an exception to the proxy since the proxy server is after the microtik router.
ERROR 2: TX error to router:
Definition: Couldn't connect to Internet. Can ping other devices connected to router but can't connect to router.
Solution: Reset router config with the default pin code 1234
1) Quick set:
CPE - Short for "Customer Premises Equipment", this term is used to mean a "wireless station". It connects to a (wireless) network, like your computer would, but doesn't create its own (like an access point).
Home AP - Simple access point. One SSID, no VLANs, etc.
PTP Bridge - Used for setting up a "Point to Point" link. Tends to be used to extend a single network to another site that doesn't have a cable running to it.
WISP AP - "Professional" access point ("WISP" is "Wireless Internet Service Provider", I think). It can serve multiple SSIDs at once, has VLAN support (to have each SSID be its own, isolated network, maybe with firewalling and routing between them), and other advanced things.
2)Using the PoE port of the router to power the IP-DECT
port 1 may be used to PoE the IP-DECT 400.
As is the default port to gateway, we have to set the gateway in other port, or find if we can use other ports to PoE.
NOTE: After some time we have found that
3)Changing the PoE output is PORT 10#, we can use port 1# as gateway. Now we will check if the voltage gateway of this output is appropriate for the IP-DECT 400
3) Configuring the ROUTER to bypass the proxy while we are connected to ISAE network.
We will set proxy.isae.fr as the default web proxy. This way the router may be able to be updated.
We will configure it in IP-> Web Proxy
microtik
[[page 2]]
Router Configuration:
0)Problems/Errors 0)Problems during configuration:
PROBLEM 1: Couldnt connect to Internet Through router.
Definition: The ISAE lan has configured a proxy HTTP server.
Solution: In order to connect to the Internet we have to set proxy.isae.fr:3128 as the proxy http server.
Notes: If we want to connect to the router we have to put its IP as an exception to the proxy since the proxy server is after the microtik router.
ERROR 2: TX error to router:
Definition: Couldn't connect to Internet. Can ping other devices connected to router but can't connect to router.
Solution: Reset router config with the default pin code 1234
1) Quick set:
CPE - Short for "Customer Premises Equipment", this term is used to mean a "wireless station". It connects to a (wireless) network, like your computer would, but doesn't create its own (like an access point).
Home AP - Simple access point. One SSID, no VLANs, etc.
PTP Bridge - Used for setting up a "Point to Point" link. Tends to be used to extend a single network to another site that doesn't have a cable running to it.
WISP AP - "Professional" access point ("WISP" is "Wireless Internet Service Provider", I think). It can serve multiple SSIDs at once, has VLAN support (to have each SSID be its own, isolated network, maybe with firewalling and routing between them), and other advanced things.
2)Using the PoE port of the router to power the IP-DECT
port 1 may be used to PoE the IP-DECT 400.
As is the default port to gateway, we have to set the gateway in other port, or find if we can use other ports to PoE.
NOTE: After some time we have found that
3)Changing the PoE output is PORT 10#, we can use port 1# as gateway. Now we will check if the voltage gateway of this output is appropriate for the IP-DECT 400
3) Configuring the ROUTER to bypass the proxy while we are connected to ISAE network.
We will set proxy.isae.fr as the default web proxy. This way the router may be able to be updated.
We will configure it in IP-> Web Proxy
microtik
[[page 2]]