Lab Setup » History » Version 7
Version 6 (Cuadro, Juan Pablo, 12/14/2014 01:08 AM) → Version 7/9 (Cuadro, Juan Pablo, 12/15/2014 04:51 PM)
h1. Lab Setup
Equipment Rack:
!{width: 70%}Rack.jpg!
All measurements were performed in Telecom Bretagne's satellite communication labs in Toulouse. Our setup consisted of a main rack containing principal hardware and several control PCs. The first contains the DVB-S2 modems, a R&S signal analyzer, a networking switch and the link emulation hardware. Here's a diagram describing the setup as well as connections.
!{width: 90%}FullSetup.png!
*Measurement equipment:*
+1 x Rhode & Schwartz FSV FSV3 Signal and Spectrum Analyzer+
Here's a video showing the 16APSK in action:
!{width: 70%}16APSK.gif!
*Networking:*
+1 x CISCO 2811
1 x Newtec EL470 DVB-S2 HUB modem
1 x Newtec EL470 DVB-S2 Station modem+
*Link Emulation:*
+1 x NI PXIe-1078 Chassis+
_The NI PXIe-1078 nine-slot chassis features a backplane that incorporates a PCI Express connection to every slot to meet a wide range of test and measurement application needs. It accepts PXI Express modules in every slot and supports standard PXI hybrid-compatible modules. The chassis includes built-in timing and synchronization features including 10 and 100 MHz reference clocks as well as a PXI trigger bus._
+2 x NI PXIe-5644R VSTs+
_The NI PXIe-5644R vector signal transceivers (VSTs) are part of a new class of instrumentation that combines a vector signal generator and vector signal analyzer with FPGA-based real-time signal processing and control. Because of this software-designed approach, a VST features the flexibility of a software defined radio architecture with RF instrument class performance._
+1 x NI PXIe-8360 PXIe Controller+
_PCI Express card installed on laboratory PC to communicate with VSTs._
*Lab PCs:*
_+PC1+ - Remote managing of Newtec modems.
+PC2+ - Data source for HUB modem, connects directly to HUB's ethernet interface A through a twisted pair cable.
+PC3+ - Data source for Station modem, connects directly to Stations's ethernet interface Aa twisted pair cable.
+PC4+ - Channel emulator controller, handles processing of VST acquired signals._
Equipment Rack:
!{width: 70%}Rack.jpg!
All measurements were performed in Telecom Bretagne's satellite communication labs in Toulouse. Our setup consisted of a main rack containing principal hardware and several control PCs. The first contains the DVB-S2 modems, a R&S signal analyzer, a networking switch and the link emulation hardware. Here's a diagram describing the setup as well as connections.
!{width: 90%}FullSetup.png!
*Measurement equipment:*
+1 x Rhode & Schwartz FSV FSV3 Signal and Spectrum Analyzer+
Here's a video showing the 16APSK in action:
!{width: 70%}16APSK.gif!
*Networking:*
+1 x CISCO 2811
1 x Newtec EL470 DVB-S2 HUB modem
1 x Newtec EL470 DVB-S2 Station modem+
*Link Emulation:*
+1 x NI PXIe-1078 Chassis+
_The NI PXIe-1078 nine-slot chassis features a backplane that incorporates a PCI Express connection to every slot to meet a wide range of test and measurement application needs. It accepts PXI Express modules in every slot and supports standard PXI hybrid-compatible modules. The chassis includes built-in timing and synchronization features including 10 and 100 MHz reference clocks as well as a PXI trigger bus._
+2 x NI PXIe-5644R VSTs+
_The NI PXIe-5644R vector signal transceivers (VSTs) are part of a new class of instrumentation that combines a vector signal generator and vector signal analyzer with FPGA-based real-time signal processing and control. Because of this software-designed approach, a VST features the flexibility of a software defined radio architecture with RF instrument class performance._
+1 x NI PXIe-8360 PXIe Controller+
_PCI Express card installed on laboratory PC to communicate with VSTs._
*Lab PCs:*
_+PC1+ - Remote managing of Newtec modems.
+PC2+ - Data source for HUB modem, connects directly to HUB's ethernet interface A through a twisted pair cable.
+PC3+ - Data source for Station modem, connects directly to Stations's ethernet interface Aa twisted pair cable.
+PC4+ - Channel emulator controller, handles processing of VST acquired signals._