< Back to Main Page

Devlog¶

In this section, every progress relevant to the project can be found, ordered in chronological order.

{UPDATE} 9/12/2014: We verified that the message is being sent by the RF transmitter. Using a frequency analizer, we checked the presence of power in the frequencies specified by the FSK modulation.
1/12/2014: After successfully communicating using the UART interface, we connected an RF module to produce a beacon. Next step is receiving and decoding the radio message.
28/11/2014: Today we managed to communicate between the microcontroller and the PC via USB (using the FTDI Serial to USB converter).
25/11/2014: Today we programmed for the first time the microcontroller in the development board, and we successfully completed our first test: switching a LED using SalvoOS.