Technical requirements » History » Version 2
Version 1 (PRIETO, Matías, 12/15/2014 02:30 AM) → Version 2/37 (PRIETO, Matías, 12/15/2014 05:22 PM)
h1. Technical requirements
h2. Functional requirements
Functional requirements define what functions need to be done to accomplish the objectives of the mission. In this way, the following requirements are defined:
* The satellite shall send one RF beacon regularly with a period time equal to 60 seconds = 1 minute.
* The satellite may send its GPS coordinates information inside the beacon frame.
* The satellite may send system state information (like temperature) inside the beacon frame.
* A ground station situated at the Télécom SatLab (Toulouse, France) shall be inside the satellite footprint at least twice a day.
h2. Performance requirements
Performance requirements define how well the system needs to perform the functions previously defined. Also they determine quantitative parameters that will set bases for the later technical measures specification. These concepts lead us to the performance requirements shown below:
* The beacon signal shall comply RTTY specifications.
* The communication time with the ground station shall be long enough in order to assure that one complete beacon frame can be received.
* The RF emitter device may be implemented with the low cost, 434 MHz, 2-FSK transmitter, available at the lab. Product information: Aurel, TX-4MAVPF10.
* If on board GPS reception is implemented, the device shall be accurate enough in order to assure, for each coordinate (latitude, longitude and attitude), an absolute error smaller than 50 m.
h2. Interface requirements
Once the system components are defined, a block diagram showing the main subsystems, their interconnections, and the external interfaces is a powerful tool to define the interfaces and interactions. By this way, the nodes represent each subsystem and the links represent each interface. There are different types of interfaces: mechanical, electrical, data protocol, etc.
The interface requirements are the set of specifications that both nodes need to meet in order to have a proper and coherent system behaviour and interactions.
h2. Functional requirements
Functional requirements define what functions need to be done to accomplish the objectives of the mission. In this way, the following requirements are defined:
* The satellite shall send one RF beacon regularly with a period time equal to 60 seconds = 1 minute.
* The satellite may send its GPS coordinates information inside the beacon frame.
* The satellite may send system state information (like temperature) inside the beacon frame.
* A ground station situated at the Télécom SatLab (Toulouse, France) shall be inside the satellite footprint at least twice a day.
h2. Performance requirements
Performance requirements define how well the system needs to perform the functions previously defined. Also they determine quantitative parameters that will set bases for the later technical measures specification. These concepts lead us to the performance requirements shown below:
* The beacon signal shall comply RTTY specifications.
* The communication time with the ground station shall be long enough in order to assure that one complete beacon frame can be received.
* The RF emitter device may be implemented with the low cost, 434 MHz, 2-FSK transmitter, available at the lab. Product information: Aurel, TX-4MAVPF10.
* If on board GPS reception is implemented, the device shall be accurate enough in order to assure, for each coordinate (latitude, longitude and attitude), an absolute error smaller than 50 m.
h2. Interface requirements
Once the system components are defined, a block diagram showing the main subsystems, their interconnections, and the external interfaces is a powerful tool to define the interfaces and interactions. By this way, the nodes represent each subsystem and the links represent each interface. There are different types of interfaces: mechanical, electrical, data protocol, etc.
The interface requirements are the set of specifications that both nodes need to meet in order to have a proper and coherent system behaviour and interactions.