3 SDR Signal Analyser – Digital Measurements » History » Version 2
JANVIER, Thibault, 12/15/2015 02:27 AM
| 1 | 1 | JANVIER, Thibault | h3. 3. SDR Signal Analyser – Digital Measurements |
|---|---|---|---|
| 2 | 1 | JANVIER, Thibault | |
| 3 | 1 | JANVIER, Thibault | +_Reminder:_+ Digital measurements will display: |
| 4 | 1 | JANVIER, Thibault | * Constellation of the received signal |
| 5 | 1 | JANVIER, Thibault | * Magnitude error |
| 6 | 1 | JANVIER, Thibault | * Phase error |
| 7 | 1 | JANVIER, Thibault | * Error Vector Magnitude |
| 8 | 1 | JANVIER, Thibault | |
| 9 | 1 | JANVIER, Thibault | The digital measurements are carried out on the “Digital” tab. Here, it is possible to configure the USRP and control all the parameters that need to be known to successfully display the constellation of the signal to be analysed. The below table sums up the parameters that have been entered as inputs according to the parameters of the signal to be analysed. |
| 10 | 2 | JANVIER, Thibault | |
| 11 | 2 | JANVIER, Thibault | p=. !Signal_to_be_analysed.png! |
| 12 | 2 | JANVIER, Thibault | +Figure 17: Characteristic of the signal to be analysed ("Reference here":http://www.lyngsat.com/Eutelsat-21B.html)+ |
| 13 | 2 | JANVIER, Thibault | |
| 14 | 2 | JANVIER, Thibault | p=.!Input_parameters_digital.png! |
| 15 | 2 | JANVIER, Thibault | +Table 5: Input parameters for digital measurements+ |
| 16 | 2 | JANVIER, Thibault | |
| 17 | 2 | JANVIER, Thibault | The results of the digital measurements are displayed on the following figure. |