SOURCEFORGE » RALF » 2015 Satellite emergency small terminal

h1. Usage test

h2. Standalone test

The standalone setup:

!http://tof.canardpc.com/preview2/7ba20544-5b65-4dbb-8233-716f50c7af09.jpg!

The microbox does not need an internet access to work. The information backbone will be unavailable, but we'll still operate in degraded mode.

This test was the first we made and shown no problem, but in order for it to be successful, we needed to tweak a bit th raspi configuration, that way we can plug a screen using HDMI connexion, plus keyboard an mouse.

The main changes we needed to do was to enable the HDMI video output using hot-plugged screens, otherwise the screen does not light up at all. Second was that fact that the Raspbian image was only 2GB big once extracted

on the 32GB SD card. (the rest was left with no partition), so we needed to expand the filesystem to fill up the entire memory.

One thing we remarked during those tests is that usually, a raspi enable its GPIO to provide a TTL link. This TTL link give access to a shell on the raspi. We tried to use this shell to reconfigure correctly the raspi 

(as neither the HDMI screen, nor the touch-screen nor SSH access was working), but we were unable to get any TTL link from those pins. We haven't dig further the issue, but it sure is one if one day it's the only option

to get access to the system.

h2. Wired internet access

Once we did had a working Microbox in standalone mode, we tried to plug in an internet access. This was done using a landline internet access connected to the WAN interface of a router (not the one of the Microbox), and we plugged a cable between the LAN interface of this router to the WAN interface of the microbox. 

As expected, the microbox did provide internet access to its LAN.

Here is a ping to google servers that is answered through the microbox:

!http://tof.canardpc.com/preview2/81ceab40-e970-4164-a420-098e2357e889.jpg!

h3. Satellite internet access

We then used the satellite antenna from the Télécom Bretagne LAB, connected to a tooway modem, which was in turn connected to the WAN interface of the Microbox. The satellite internet was provided by the ViaSat account of the Télécom Bretagne lab.

We did had to wait a bit until the internet connexion was operational, maybe because of a problem in the coaxial cable that is between the satellite antenna and the modem. The coaxial cable was then changed, and the connectivity was better.

Once we were connected, the microbox reacted accordingly, and the microbox's network was connected to the internet, we were able to receive internet on a device connected on Wifi to the Microbox's router.

Here was the setup we used to test the satellite connexion:

!http://tof.canardpc.com/preview2/e358881e-6b96-4b80-b5bb-92382dcd69a1.jpg! 

We then decided to test the VoIP phone. In order to test it, we needed a SIP account that we set using the phone's interface. The SIP was provided to us by Laurent Franck. During this test, we faced a first problem : even if it was connected to internet, we didn't here anything on the headset. After testing an other phone of the same type and an other handset, we arrived to the conclusion that the headset of the phone was broken. Due to the fact that we didn't have other headset compatible with the phone, we changed the phone. 

Here is the new configuration of the Microbox.

!new_micro.jpg!