Link Budget » History » Version 14
Version 13 (RIBAS MACHADO, Ederson , 03/20/2015 03:18 AM) → Version 14/28 (RIBAS MACHADO, Ederson , 03/20/2015 04:22 AM)
h1. Satellite Link Budget
In this section we are going to explain what is a satellite link budget and what are the main parameters it involves.
h2. Satellite Communication System
Assuming that a telecommunication system is composed by a transmitter a medium and a receiver, the link budget is the accounting of all gain and losses in the power signal from the transmitter, passing through the medium, to the receiver.So, the link budget analyse how much power is lost in the signal path, and can discriminate the loss power values of each cause of loss.
p. p>. To easily understand, we can analyse the satellite system showed in figure 1. Considering a signal one-way-travel, and just analyzing the individual uplink path, the link budget will perform the power received by the satellite taking in account the amplification and the attenuation of the link.The link, in this case, is composed by the transmitter: the _Earth Station_, the media: _the atmosphere and free space_ ,and the receiver: _the Satellite_. Then in the link budget calculating we taking in account the following losses and gains:
* Gain of the transmitter and receiver amplifier.
amplifier
* Attenuation in the atmosphere propagation. propagation
* Depointing losses. losses
* Polarization mismatch losses. losses
* Losses losses in transmitting and receiving equipment. equipment
p=. !{width: 50%}figure2.png!
>>> . Figure 2 - Gain and losses from a signal travelling from a transmitter to a receiver, considering a uplink path. *P* is the power before the transmitter amplifier, *Gain* is the transmitter amplifier gain, *PR* is the power received, *Loss 1* the power lost due to the transmitter equipment, *Loss 2* the power lost due to the atmosphere effects, *Loss 3* the power lost due to the receiver equipment.
p. To evaluate the quality of our link, one important measure is the Bit Error Rate, $BER$. If we want that our signal maintain a low $BER$ we must to start with a higher power and make sure that even with all losses along the path way, we'll have enough power available at each point to keep this $BER$ value.The $BER$ is a function of the bit energy per noise-density of the signal $\frac{Eb}{No}$ of the signal. The ratio between $BER$ and $\frac{Eb}{No}$ depends on the digital modulating implemented. An example of $BER$ x $\frac{Eb}{No}$ graphic is showed in figure 3. Higher $\frac{Eb}{No}$ means better quality.
p=. !{width: 40%}figure3.png!
>>> . Figure 3 - Exemples of $BER$ x $\frac{Eb}{No}$ graphics. M-PSK constellations.
Other important parameters used to consider in link budget analysis performance are:
Link performance:$$Carrier-to-noise ratio \frac{C}{No} $$
Transmit equipment performance:$$Effective isotropic radiated power EIRP$$
Receiving equipment performance:$$ Figure of merit G/T$$
tip.
To fully understand what is the link budget first we must understand how it is formed a satellite communication system. A satellite system is composed of three operational components: the _ground segment_, the _space segment_ and the _control segment_.
* The _space segment_ contains the satellite itself (or satellite constellation) and the uplink and downlink satellite links.
* The _ground segment_ consists of all the traffic earth stations.
* The _control segment_ consists of the ground facilities and systems for control and monitoring the satellite.
In this section we are going to explain what is a satellite link budget and what are the main parameters it involves.
h2. Satellite Communication System
Assuming that a telecommunication system is composed by a transmitter a medium and a receiver, the link budget is the accounting of all gain and losses in the power signal from the transmitter, passing through the medium, to the receiver.So, the link budget analyse how much power is lost in the signal path, and can discriminate the loss power values of each cause of loss.
p. p>. To easily understand, we can analyse the satellite system showed in figure 1. Considering a signal one-way-travel, and just analyzing the individual uplink path, the link budget will perform the power received by the satellite taking in account the amplification and the attenuation of the link.The link, in this case, is composed by the transmitter: the _Earth Station_, the media: _the atmosphere and free space_ ,and the receiver: _the Satellite_. Then in the link budget calculating we taking in account the following losses and gains:
* Gain of the transmitter and receiver amplifier.
amplifier
* Attenuation in the atmosphere propagation. propagation
* Depointing losses. losses
* Polarization mismatch losses. losses
* Losses losses in transmitting and receiving equipment. equipment
p=. !{width: 50%}figure2.png!
>>> . Figure 2 - Gain and losses from a signal travelling from a transmitter to a receiver, considering a uplink path. *P* is the power before the transmitter amplifier, *Gain* is the transmitter amplifier gain, *PR* is the power received, *Loss 1* the power lost due to the transmitter equipment, *Loss 2* the power lost due to the atmosphere effects, *Loss 3* the power lost due to the receiver equipment.
p. To evaluate the quality of our link, one important measure is the Bit Error Rate, $BER$. If we want that our signal maintain a low $BER$ we must to start with a higher power and make sure that even with all losses along the path way, we'll have enough power available at each point to keep this $BER$ value.The $BER$ is a function of the bit energy per noise-density of the signal $\frac{Eb}{No}$ of the signal. The ratio between $BER$ and $\frac{Eb}{No}$ depends on the digital modulating implemented. An example of $BER$ x $\frac{Eb}{No}$ graphic is showed in figure 3. Higher $\frac{Eb}{No}$ means better quality.
p=. !{width: 40%}figure3.png!
>>> . Figure 3 - Exemples of $BER$ x $\frac{Eb}{No}$ graphics. M-PSK constellations.
Other important parameters used to consider in link budget analysis performance are:
Link performance:$$Carrier-to-noise ratio \frac{C}{No} $$
Transmit equipment performance:$$Effective isotropic radiated power EIRP$$
Receiving equipment performance:$$ Figure of merit G/T$$
tip.
To fully understand what is the link budget first we must understand how it is formed a satellite communication system. A satellite system is composed of three operational components: the _ground segment_, the _space segment_ and the _control segment_.
* The _space segment_ contains the satellite itself (or satellite constellation) and the uplink and downlink satellite links.
* The _ground segment_ consists of all the traffic earth stations.
* The _control segment_ consists of the ground facilities and systems for control and monitoring the satellite.