NI myRIO » History » Version 10
Version 9 (PASCHOS, Alexandros, 03/11/2016 03:40 PM) → Version 10/14 (PASCHOS, Alexandros, 03/11/2016 03:42 PM)
h1. *2.3 NI myRIO*
The National Instruments myRIO-1900 is an embedded portable Reconfigurable I/O (RIO) system. The NI myRIO-1900 provides analog input (AI), analog output (AO), digital input and output (DIO), audio, and power output in a compact embedded device. The NI myRIO-1900 connects to a host computer over USB and wireless 802.11b,g,n.
p=. !{width: 50%}https://sourceforge.isae.fr/attachments/download/1822/NI_myRio_1900.png(NI myRIO Schematic)!
_Figure 2.4 NI myRIO 1900_
h2. *2.3.1 NI myRIO Characteristics*
The myRio uses a Xilinx Z-7010 processor with 2 cores at 667MHz each. A NVM (non-volatile memory) of 256MB and a DDR3 memory of 512MB with a clock frequency of 533MHz and a 16bit data bus. The USB host and device ports are 2.0 Hi-Speed ports. The Audio Input is a one stereo input consisting of two AC-coupled single-ended channels. Input impedance is 10kΩ at DC with a nominal range of ±2.5 and a bandwidth at 2Hz to 20KHz as expected for audio.
p=. !{width: 50%}https://sourceforge.isae.fr/attachments/download/1822/NI_myRio_1900.png(NI myRIO Schematic)!
_Figure 2.4 NI myRIO 1900_
|\2=._Table 2.1_ NI myRIO 1900|
|Processor Type | Xilinx Z-7010 |
|Processor Speed | 667MHz |
|Processor Cores |2 |
|NVM Memory | 256MB |
|DDR3 Memory | 512MB |
|DDR3 Clock Frequency| 533MHz|
|DDR3 Data Bus| 16bits|
|Wireless Radio mode| IEEE 802.11 b,g,n|
|Frequency Band|2.4 GHz|
|Audio Input| Stereo with 2 AC-coupled
single-ended channels|
|Input Impedance| 10KΩ|
|Nominal Range| ±2.5V|
|Bandwidth| 2Hz to 20KHz|
p=. !{width: 50%}https://sourceforge.isae.fr/attachments/download/1822/NI_myRio_1900.png(NI myRIO Schematic)!
_Figure 2.4 NI myRIO 1900_
h3. *2.3.2 References*
[1] "User Guide and Specifications - NI myRIO 1900":http://www.ni.com/pdf/manuals/376047a.pdf
The National Instruments myRIO-1900 is an embedded portable Reconfigurable I/O (RIO) system. The NI myRIO-1900 provides analog input (AI), analog output (AO), digital input and output (DIO), audio, and power output in a compact embedded device. The NI myRIO-1900 connects to a host computer over USB and wireless 802.11b,g,n.
p=. !{width: 50%}https://sourceforge.isae.fr/attachments/download/1822/NI_myRio_1900.png(NI myRIO Schematic)!
_Figure 2.4 NI myRIO 1900_
h2. *2.3.1 NI myRIO Characteristics*
The myRio uses a Xilinx Z-7010 processor with 2 cores at 667MHz each. A NVM (non-volatile memory) of 256MB and a DDR3 memory of 512MB with a clock frequency of 533MHz and a 16bit data bus. The USB host and device ports are 2.0 Hi-Speed ports. The Audio Input is a one stereo input consisting of two AC-coupled single-ended channels. Input impedance is 10kΩ at DC with a nominal range of ±2.5 and a bandwidth at 2Hz to 20KHz as expected for audio.
p=. !{width: 50%}https://sourceforge.isae.fr/attachments/download/1822/NI_myRio_1900.png(NI myRIO Schematic)!
_Figure 2.4 NI myRIO 1900_
|\2=._Table 2.1_ NI myRIO 1900|
|Processor Type | Xilinx Z-7010 |
|Processor Speed | 667MHz |
|Processor Cores |2 |
|NVM Memory | 256MB |
|DDR3 Memory | 512MB |
|DDR3 Clock Frequency| 533MHz|
|DDR3 Data Bus| 16bits|
|Wireless Radio mode| IEEE 802.11 b,g,n|
|Frequency Band|2.4 GHz|
|Audio Input| Stereo with 2 AC-coupled
single-ended channels|
|Input Impedance| 10KΩ|
|Nominal Range| ±2.5V|
|Bandwidth| 2Hz to 20KHz|
p=. !{width: 50%}https://sourceforge.isae.fr/attachments/download/1822/NI_myRio_1900.png(NI myRIO Schematic)!
_Figure 2.4 NI myRIO 1900_
h3. *2.3.2 References*
[1] "User Guide and Specifications - NI myRIO 1900":http://www.ni.com/pdf/manuals/376047a.pdf